Car-Go-Mate™ Heavy Duty Scooter Lift
The Freedom Lift Heavy-Duty Car-Go-MateTM Scooter Lift attaches to your receiver hitch. It can be configured to accept three and four-wheel scooters. Simply drive onto the platform. As the lift is operated, the scooter is raised and securely clamped without additional tie-downs. Its weight sensitive platform automatically folds up and out of the way when not lifting a scooter.

The Heavy-Duty Car-Go-Mate™ Scooter Lift incorporates the same features as the Heavy-Duty Car-Go-Mate™ Power Chair Lift; however includes a patented automatic hold-down arm.
  • Patented automatic hold-down arm: Secures the scooter to the lift.
  • Adaptable to most all 3&4 wheel scooters: Extremely flexible, can be used with the majority of standard weight scooters.
  • Scooter positioning wheel wheels: Automatically aligns the scooter into position.
  • Scooter track positioning: Allows for adjustability.
  • Center-of-gravity positioning: Provides for proper balance and positioning.
  • Scooter width positioning: Provides three adjustable positions.
  • Forward or rearward egress: Consumer friendly.

   Installation and Owner's Manual

Product Specification
Recommended Maximum Lifting Capacity:350 pounds
Weight of Lift:110 pounds
Maximum Lifting Height:21.25" platform to ground
Actuation:12 VDC motor powered by vehicle or mobile power pack
Vehicle Receiver Hitch:Class II (1.25"), Class III (2")
Horizontal Hitch Adjustment:4 positions (3" range)
Track Width:Three 8" Tracks
Maximum Width Chair/Scooter:27"
Maximum Wheelbase Chair/Scooter:40"
Minimum Extension Beyond Receiver:41.5" w/ scooter, 17" folded
Platform Adjustability (Hitch to Platform):2.25" - 6.25"


Vehicle Requirements
The Freedom Lift Heavy-Duty Car-Go-MateTM Scooter Lift will fit most medium and large vehicles. Combined scooter and lift weights must not exceed the tongue weight limits of your hitch or vehicle. Check with your vehicle manufacturer for hitch tongue weight limits. The Heavy-Duty Car-Go-Mate™ Scooter Lift reduces your hitch ground clearance by no more than ½".


Product Features
  • Automatically clamps the scooter to the platform
  • Robust welded steel construction
  • Available in Class II (1.25") or Class III (2") models
  • Easy to install, adjust, and can be reinstalled if you purchase a new vehicle
  • Powered by your vehicle's battery
  • Adapts to 3 or 4 wheel scooters without scooter modifications
  • Weight sensitive platform automatically folds when lifted without scooter
  • Automatic tilt for added ground clearance and weight transfer
  • Adjusts to accomodate a wide range of scooters
  • Forward or reverse exit from platform
  • Platform wheel wells assure proper scooter positioning
  • Lighted license plate bracket and courtesy lights illuminate lift and trunk areas
  • Keyed operation for added security
  • Single rocker switch control
  • Manual crank in case of power failure
  • Attractive and durable metallic gray powder coated finish
  • Fits on most vehicles
  • Automatically folds up when not in use
  • Limited lifetime warranty guarantees you satisfaction
  • Many car companies reimburse all or part of the cost with the purchase of a new vehicle